List of Objectives

Objectives

• Create a To-do List     Check!
• Choose the most viable hydrogen generator design     Check!
• Purchase the parts for the generator     Check!
• Build/put together the generator     Check!

• Calculate the initial gallons per hour (GPH) of the ATV     Check!
• Perform three 1-hour tests to ensure repeat ability (I'm open to other suggestions)
• Ensure accuracy by use of a meter stick in the fuel tank to both fill and check post fuel consumption
• Research a basic bubbler as a safety mechanism (prevents a backfire from reaching the generator)     Check!
• Purchase/find parts     Check!
• Build
• Research fuel injection control (to prevent excessive fuel to be used)    Check!
• Purchase/find parts     Deemed Unnecessary
• Research for required power draws on the battery     Check!
• Test to confirm sufficiency
• Research necessary electrolyte for electrolysis (the splitting of H20)     Check!
• Purchase/find    
• Integrate an on/off switch to relay power to the generator on the handlebar (prevents gas production when the engine is off)    Check!
• Mount safety bubbler and hydroxy generator     Check!
• Calculate post installation of the gallons per hour (GPH) of the ATV     Check!
• Perform three 1-hour tests
• Note any non-calculable changes i.e. increased throttle response/power, increased top speed, or irregularities     Check!
• Be prepared for difficulties     Check!

These objectives must be accomplished by the end of this month, leaving me ten main objectives to accomplish by then, each requiring between a couple hours to nearly a whole day to complete. Any open time after homework will here-on-out be put towards this project.